Highlights from Edifier S2000 Reviews
- Full wooden side panel finish achieves an elegant and luxurious look
- Four EQ Modes - Vocal, Monitor, Classic and Dynamic
- Wireless remote for audio input, volume adjustment and mode switching
- Inputs supported - Coaxial, Optical, RCA, AUX and Bluetooth
HiFi Classic Concepts Cutting Edge Technology
For the first time, Edifier has brought cutting edge sound technology to a classic style. Edifier S2000 Pro Bookshelf Speakers feature elegant side wood panelling, they elevate the classic style of bookshelf speakers to the next level of sound with modern sensibilities and advancements.
Professionalism, Elegance and Luxury
Matte black paint with luxurious wood baffle plate, metallic surface grill and gold pads underneath. Edifier S2000 Pro Bookshelf Speakers exude elegance and demands to be the centre of attention with both its style and sound.
Thick Wood Side Panels
Edifier S2000 Pro have 18 mm thick wood side panels reducing the resonance and highlighting aspects of audio design you have never heard before.
Rich Low-Distorted Treble
Edifier S2000 Pro Bookshelf Speakers come equipped with a rich low-distorted flat diaphragm tweeter. The flat diaphragm provides a fast response rate that gives inherent advantages such as excellent high frequencies that lower tiered bookshelf speakers do not provide.
Aluminium Cone Woofer
The high-strength low-distortion from the aluminium cone makes sounds unique and clear. Edifier S2000 Pro Bookshelf Speakers take advantage of the DSP digital electronic crossover thanks to the help of German engineering of the KLIPPEL precise analysis system. This system is used so that the metal aspects of these speakers do not emit the sound of metal meanwhile taking advantages of the metal aspects. The energy-absorbing rubber hemming results in giving the 5.5-inch aluminium cone woofer a precise, clean and low-frequency performance.
DSP-Based Electronic Crossover and Dynamic Management
Edifier S2000 Pro uses an application of new electro-acoustic technology. Taking advantage of two Texas Instruments digital processing DSP chips, TLV320AIC3254, Edifier S2000 Pro uses its miniDSP function to reach the culmination of incredibly loud and heavy bass. Independent of the electronic crossover and dynamic management, it offers precise control of frequency allocation for the bookshelf loudspeaker performance.
Digital-to-Analogue and Analogue-to-Digital Converter Signal
The onboard DAC (digital-to-analogue conversion) and ADC (analogue-to-digital conversion) of your Edifier S2000 Pro Bookshelf Speakers have a built-in officially branded Burr-Brown PCM1802 Texas Instrument. The Burr-Brown DAC and ADC uses audio signalling that reaches towards 105 dB signal to noise ratio (SNR). The analogue input signal uses traditional HiFi methods that are recognised by WIMA capacitors. This in turn ensures a lower signal loss. As for optical and coaxial inputs, the interface chip, PCM9211 also from Burr-Brown, supports a 24-bit 216-kHz high precision input digital audio signal.
Adjustable Treble, Bass and Volume Controls
Located on the back of your Edifier S2000 Pro Bookshelf Speakers, there are three knobs for adjusting treble, bass and volume. The master volume knob has precision adjustment and memory volume control set above a certain volume level.
Full Digital Amplifier Powered Speaker
Edifier S2000 Pro uses three professional digital amplifier chips for producing the best sound in its class. The TAS5754 from Texas Instruments run independently from each other ensuring they do not cause interference while running their respective purpose. The first chip is in control of treble and bass, respectively driving both speakers. The second chip runs strictly the woofers of Edifier S2000 Pro Bookshelf Speakers using a PBTL (parallel to the bridge) connection which helps build power reserves. The last TAS5754 is dedicated to the amplifier output frequency of 768 KHz. With the dedicated chip these speakers are fully optimise to reduce high frequency distortion and local noise.
Supports Up To 192KHz Sampling Rate
Edifier S2000 Pro Bookshelf Speakers' digital audio interfaces with a digital audio signal of 24-bit 192 KHz to meet the needs of enthusiasts demanding signal reproduction.
Edifier S2000 Pro is designed from the start with low-distortion tweeters and woofers to make a truly system-level "low distortion."
5-Pin Professional Edifier Connection
S2000 Pro Bookshelf Speakers uses a unique five-pin connector made by Edifier. The connector is made with special care to separate treble and bass signal transmission, as well as, reduce interference. Transparent black metallic yarn, professional wound line with length up to 16 feet.
Bluetooth 4.0 aptX Decoder
Edifier S2000 Pro Bookshelf Speakers uses state-of-the-art CSR8645 chipset for Bluetooth 4.0 connection. With a built-in aptX decoder, it generates lossless Bluetooth playback. Enjoy the full quality sound from your laptop, phone, tablet or computer.
What Comes in the Box
- 1 X Set of Edifier S2000 Pro Bluetooth Bookshelf Speakers
- 1 X Remote Control
- 1 X 3.5 mm - RCA Audio Cable
- 1 X RCA to RCA Audio Cable
- 1 X Fiber Optic Input Cable
- 1 X Speaker Connecting Cable
- 1 X User Manual
One-Year Local Singapore Limited Hardware Warranty
- Length: 34.29 cm
- Width: 26.67 cm
- Height: 20.32 cm
- Weight: 16.60 kg
- Power Output
- L/R (treble): 12 W +12 W RMS
- L/R (mid-range and bass): 50 W + 50 W RMS
- Signal To Noise Ratio: ≥94 dB(A)
- Noise Level: ≤25 dB(A)
- Input Sensitivity
- Balanced input: 700±50 mV
- Auxiliary input: 600±50 mV
- Bluetooth input: 350±50 mFFs
- Optical input: 350±50 mFFs
- Coaxial input: 350±50 mFFs
- Frequency Response: 48 Hz~20 KHz
- Tweeter Unit: Planar diaphragm tweeters
- Mid-Range and Bass Driver: 5.5 inch
- Connection Cable: 5 M/16.4 FT